- IUT Repository Home
- →
- Mechanical and Production Engineering (MPE)
- →
- Thesis
- →
- Graduate
- →
- 2014
- →
- View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.
| dc.contributor.author | Chowdhury, Mohammad Shariful Islam | |
| dc.date.accessioned | 2021-09-13T03:48:21Z | |
| dc.date.available | 2021-09-13T03:48:21Z | |
| dc.date.issued | 2014-11-15 | |
| dc.identifier.citation | [1] Johnson, K. L., ―Contact Mechanics‖, Cambridge University Press, ISBN 0-521- 34796-3, pp. 407, (1985). [2] Stachowiak, G. W. and Batchelor, A. W., ―Engineering tribology‖, Boston: Butterworth-Heinemann, ISBN 0-7506-7304-4, pp. 450, (2001). [3] Kalpakjian, S., and Schmid, S.R., ―Manufacturing Processes for Engineering Materials”, 5th ed., India: Dorling Kindersley Pvt. Ltd. (under license from Pearson Education in South Asia), pp. 440-447, (2009). [4] Silberschmidta, V.V, Mahdyb, S.M.A., Goudab, M.A., Naseera, A., Agostino Maurottoa, A. and Roya, A., ―Surface-roughness improvement in ultrasonically assisted turning‖, 2nd CIRP Conference on Surface Integrity (CSI), Procedia CIRP, Volume 13, pp. 49 – 54, (2014). [5] Mahdy, S.M.A., Gouda, M.A. and Silberschmidt, V.V., ―Study of ultrasonically assisted turning of stainless steel and brass alloys‖, Journal of Physics: Conference Series 451, paper 012037, (2013). [6] Muhammad, R., Maurotto, A., Roy, A. and Silberschmidt, V.V., ―Ultrasonically assisted turning of Ti-6Al-2Sn-4Zr-6Mo‖, Journal of Physics: Conference Series 382, paper 012016, (2012). [7] Rimkevičienė, J., Ostaševičius,V., Jūrėnas, V. and Gaidys, R., ―Experiments and simulations of ultrasonically assisted turning tool‖, MECHANIKA, ISSN 1392 – 1207, Volume 1, Issue 75, (2009). [8] Maurotto, A., Muhammad, R., Roy, A. and Silberschmidt, V.V., ―Enhanced ultrasonically assisted turning of a β-titanium alloy‖, Ultrasonics 53, pp. 1242, (2013). [9] Patil, S., Joshi, S., Tewari, A. and Joshi, S.S., ―Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V‖, Ultrasonics, Volume 54, Issue 2, pp. 694–705, (2014). [10] Sahoo, A.K. and Sahoo, B., ―Experimental investigation on flank wear and tool life, cost analysis and mathematical model in turning hardened steel using coated carbide inserts‖, International Journal of Industrial Engineering Computations, Issue 4, pp. 571–578, (2013). [11] Das, S.R., Nayak, R.P. and Dhupal, D., ―Optimization of Cutting Parameters on Tool Wear and Work piece Surface Temperature In Turning of AISI D2 Steel‖, International journal of Lean Thinking, Volume 3, Issue 2, (2012). [12] Zhou, Q., Hong, G. S. and Rahman, M., ―A New Tool Life Criterion For Tool Condition Monitoring Using a Neural Network”, Engineering Application Artificial Intelligence, Volume 8, Number 5, pp. 579-588, (1995). [13] Braghini, A. Jr., and Coelho, R.T, ―An Investigation of the Wear Mechanisms of Polycrystalline Cubic Boron Nitride (PCBN) Tools When End Milling Hardened Steels At Low/Medium Cutting Speeds‖, International Journal on Advanced Manufacturing Technology, Volume 17, pp. 244-257, (2001). 106 | P a g e [14] Chien, W.T. and Tsai, C.S, ―The investigation on the prediction of tool wear and the determination of optimum cutting conditions in machining 17-4PH stainless steel‖, Journal of Materials Processing Technology, Volume 140, pp. 340–345, (2003). [15] Ghani, J.A., Choudhury, I.A. and Hassan, H.H., ―Application of taguchi method in the optimization of end milling parameters,‖ Journal of Materials Processing Technology, Volume 145, pp. 84-92, (2004). [16] Özel, T. and Karpat, Y., ―Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks‖, International Journal of Machine Tools and Manufacture, Volume 45, pp. 467–479, (2005). [17] Kumar, S., Durai, A.R. and Sornakumar, A., ―The Effect of Tool Wear on Tool Life Of Alumina-Based Ceramic Cutting Tools While Machining Hardened Martensitic Stainless Steel,‖ Journal of Materials Processing Technology, Volume 173, pp. 151- 156, (2006). [18] Amin, A. K. M. N., Hafiz, A. M. K., Lajis, M. A. and Patwari, A. U., ―Prediction of tool life and experimental investigation during hot milling of AISI H13 tool steel,‖ Advanced Materials Research, Volume 83-86, pp. 190-197, (2010). [19] Mahmoud, E. A. E. and Abdelkarim, H. A., ―Optimum Cutting Parameters in Turning Operations using HSS Cutting Tool with 450 Approach Angle‖, Sudan Engineering Society Journal, Volume 53, Number 48, pp. 25-30, (2006). [20] Takeyama, H. and Murata, R., ―Basic Investigation of Tool Wear,‖ Trans. ASME, J. Eng. Ind., Volume 85, pp. 33–38, (1963). [21] Al-Ahmari, A. M. A., ―Predictive machinability models for a selected hard material in turning operations‖, Journal of Materials Processing Technology, Volume 190, pp. 305–311, (2007). [22] Oxley, P.L.B., ―The Mechanics of Machining: An Analytical Approach to Assessing Machinability”, Ellis Horwood, Chichester, (1989). [23] Trent, E.M. and Wright, P.K, ―Metal Cutting‖, 4th Edition, Butterworth- Heinemann, Boston, (2000). [24] Natarajan, U., Arun, P. and Periasamy, V. M., ―On-line Tool Wear Monitoring in Turning by Hidden Markov Model (HMM)‖, Institution of Engineers (India) Journal (PR), Volume 87, pp. 31-35, (2007). [25] Özel, T., Karpat, Y., Figueira, L. and Davim, J. P., ―Modeling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts”, Journal of Materials Processing Technology, Volume189, pp.192–198, (2007). [26] Lan, T.S., Lo, C. Y., Wang M.Y. and Yen, A.Y., ―Multi Quality Prediction Model of CNC Turning Using Back Propagation Network‖, Information Technology Journal, Volume 7, Number 6, pp. 911-917, (2008). [27] Fnides, B., Aouici, H. and Yallese, M.A., ―Cutting forces and surface roughness in hard turning of hot work steel X38CrMoV5-1 using mixed ceramic‖, Mechanika, Volume 2, Number 70, pp. 73-78, (2008). [28] Biswas, C. K., Chawla, B. S., Das, N.S.and Srinivas, E.R.K.N.K, ―Tool Wear Prediction using Neuro-Fuzzy System‖, Institution of Engineers (India) Journal (PR), Volume 89, pp. 42-46, (2008). 107 | P a g e [29] Fu, P. and Hope, A.D, ―A Hybrid Pattern Recognition Architecture for Cutting Tool Condition Monitoring‖, Technology and Applications, Volume 24, Number 4, pp. 548-558, (2008). [30] Wang, M.Y. and Lan, T.S, ―Parametric Optimization on Multi-Objective Precision Turning Using Grey Relational Analysis‖, Information Technology Journal, Volume 7, pp.1072-1076, (2008). [31] Kitagawa, T., Maekawa, K., Shirakashi, T. and Usui, E., ―Analytical prediction of flank wear of carbide tools in turning plain carbon steels (part 1),‖ Japanese Society of Precision Engineering, Volume 22, Issue 4, pp. 263–269, (1988). [32] Iwata, K., Ashara, J. and Okushima, K., ―On the mechanism of built-up edge formation in cutting,‖ Annals of the CIRP, Volume 19, Issue 2, pp. 323–330, (1971). [33] Lin, W.S., Lee, B.Y. and Wu, C.L., ―Modeling the surface roughness and cutting force for turning”, Journal of Materials Processing Technology, Volume 108, pp. 286- 293, (2001). [34] Feng, C.X. and Wang, X., ―Development of Empirical Models for Surface Roughness Prediction in Finish Turning‖, International Journal of Advanced Manufacturing Technology, Volume 20, pp. 348–356, (2002). [35] Suresh, P.V.S., Rao, P.V. and Deshmukh, S.G, ―A genetic algorithmic approach for optimization of surface roughness prediction model‖, International Journal of Machine Tools and Manufacture, Volume 42, pp. 675–680, (2002). [36] Lee, S.S. and Chen, J.C, ―Online surface roughness recognition system using artificial neural networks system in turning operations‖, International Journal of Advanced Manufacturing Technology, Volume 22, pp. 498–509, (2003). [37] Choudhury, S. K. and Bartarya, G., ―Role of temperature and surface finish in predicting tool wear using neural network and design of experiments‖, International Journal of Machine Tools and Manufacture, Volume 43, pp. 747– 753, (2003). [38] Kirby, E.D., Zhang, Z. and Chen, J.C., ―Development of An Accelerometer based surface roughness Prediction System in Turning Operation Using Multiple Regression Techniques‖, Journal of Industrial Technology, Volume 20, Number 4, pp. 1-8, (2004). [39] Eze, S.C., Izelu, C.O., Oreko, B.U. and Edward, B.A., ―Experimental Study of Induced Vibration and Work Surface Roughness in the Turning of 41Cr4 Alloy Steel using Response Surface Methodology‖, International Journal of Innovative Research in Science, Engineering and Technology, ISSN: 2319-8753, Volume 2, Issue 12, (2013). [40] Kumar, K.A., Ratnam, C., Murthy, B.S.N., Ben, B.S. and Reddy, K.R.R.M., ―Optimization of Surface Roughness in Face Turning Operation in Machining Of En- 8‖, International Journal of Engineering Science & Advanced Technology, ISSN: 2250–3676, Volume 2, Issue 4, pp. 807 – 812, (2012). [41] Basha, N.Z. and Vivek, S., ―Optimization of CNC Turning Process Parameters on Aluminium 6061 Using Response Surface Methodology‖, Engineering Science and Technology: An International Journal (ESTIJ), Volume XXX, No. XXX, (2013). [42] Raghunandan, B.V., Bhandarkar, S.L. and Pankaj, K.S., ―An Experimental Mathematical Modelling of Surface Roughness in Turning Opertion of En19 with Carbide Tool‖, International Journal of Mechanical Engineering and Research, ISSN No. 2249-0019, Volume 3, Number 5, pp. 495-502, (2013), 108 | P a g e [43] Rodrigues, L.L.R., Kantharaj, A.N., Kantharaj, B., Freitas, W.R.C. and Murthy, B.R.N., ―Effect of Cutting Parameters on Surface Roughness and Cutting Force in Turning Mild Steel‖, Research Journal of Recent Sciences, ISSN 2277-2502, Volume , Issue 10, pp. 19-26, (2012). [44] Kohli, A. and Dixit, U.S., ―A neural-network-based methodology for the prediction of surface roughness in a turning process‖, International Journal of Advanced Manufacturing Technology, Volume 25, pp.118–129, (2005). [45] Pal, S.K. and Chakraborty, D., ―Surface roughness prediction in turning using artificial neural network‖, Neural Computing and Application, Volume 14, pp. 319– 324, (2005). [46] Singh, H. and Kumar, P., ―Optimizing Feed Force for Turned Parts through the Taguchi Technique‖, Sadhana, Volume 31, Number 6, pp. 671–681, (2006). [47] Ahmed, S.G, ―Development of a Prediction Model for Surface Roughness in Finish Turning of Aluminium‖, Sudan Engineering Society Journal, Volume 52, Number 45, pp. 1-5, (2006). [48] Abburi, N.R. and Dixit, U.S, ―A knowledge-based system for the prediction of surface roughness in turning process‖, Robotics and Computer- Integrated Manufacturing, Volume 22, pp. 363–372, (2006). [49] Zhong, Z.W., Khoo, L.P. and Han, S.T, ―Prediction of surface roughness of turned surfaces using neural networks‖, International Journal of Advance Manufacturing Technology, Volume 28, pp. 688–693, (2006). [50] Kumanan, S., Saheb, S.K.N. and Jesuthanam, C.P, ―Prediction of Machining Forces using Neural Networks Trained by a Genetic Algorithm‖, Institution of Engineers (India) Journal, Volume 87, pp. 11-15, (2006). [51] Doniavi, A., Eskanderzade, M. and Tahmsebian, M., ―Empirical Modeling of Surface Roughness in Turning Process of 1060 steel using Factorial Design Methodology”, Journal of Applied Sciences, Volume 7, Number 17, pp. 2509-2513, (2007). [52] Kassab, S.Y. and Khoshnaw, Y.K., ―The Effect of Cutting Tool Vibration on Surface Roughness of Work piece in Dry Turning Operation‖, Engineering and Technology, Volume 25, Number 7, pp. 879-889, (2007). [53] Thamizhmanii, S., Saparudin, S. and Hasan, S., ―Analysis of Surface Roughness by Using Taguchi Method‖, Achievements in Materials and Manufacturing Engineering, Volume 20, Issue 1-2, pp. 503-505, (2007). [54] Srikanth, T. and Kamala, V., ―A Real Coded Genetic Algorithm for Optimization of Cutting Parameters in Turning IJCSNS‖, International Journal of Computer Science and Network Security, Volume 8, Number 6, pp. 189-193, (2008). [55] Arif, M.D., Patwari, A.U. and Chowdhury, N.A., ―Surface roughness characterization using digital image processing technique‖, Proceedings of the 13th Annual Paper Meet (APM), Mechanical Engineering Division, The Institution of Engineers, Bangladesh, Volume 13, pp. 29-35, (2010). [56] Patwari, A.U., Arif, M.D., Chowdhury, N.A. and Chowdhury, S. I., ―3-D Contour generation and determination of surface roughness of shaped and horizontally milled 109 | P a g e plates using digital image processing,‖ International Journal of Engineering, Annals of Faculty of Engineering, Hunedoara, Issue: 3, Issn: 1584-2673, (2011). [57] Sahoo, P., Barman, T.K. and Routara, B.C., ―Taguchi based practical dimension modeling and optimization in CNC turning‖, Advance in Production Engineering and Management, Volume 3, Number 4, pp. 205-217, (2008). [58] Reddy, B.S., Padmanabhan, G. and Reddy, K.V.K., ―Surface Roughness Prediction Techniques for CNC turning‖, Asian Journal of Scientific Research, Volume 1, Number 3, pp. 256-264, (2008). [59] Wannas, A.A, ―RBFNN Model for Prediction Recognition of Tool Wear in Hard Turning‖, Journal of Engineering and Applies Science, Volume 3, Number 10, pp. 780- 785, (2008). [60] Lan, T.S., Lo, C.Y., Wang M.Y. and Yen, A.Y., ―Multi Quality Prediction Model of CNC Turning Using Back Propagation Network”, Information Technology Journal, Volume 7, Number 6, pp. 911-917, (2008). [61] Thamma, R., ―Comparison between Multiple Regression Models to Study Effect of Turning Parameters on the Surface Roughness‖, Proceedings of the 2008 IAJC-IJME International Conference, ISBN 978-1-60643-379-9, Paper 133, ENG 103, pp. 1-12, (2008). [62] Shetty, R., Pai, R., Kamath, V. and Rao, S.S, ―Study on Surface Roughness Minimization in Turning of DRACs using Surface Roughness Methodology and Taguchi under Pressured Steam Jet Approach‖, ARPN Journal of Engineering and Applied Sciences, Volume 3, Number 1, pp. 59-6, (2008). [63] Sahu, M. and Sahu, K., ―Optimization of Cutting Parameters on Tool Wear, Work piece Surface Temperature and Material Removal Rate in Turning of AISI D2 Steel‖, International Journal of Advanced Mechanical Engineering, ISSN 2250-3234, Volume 4, Number 3, pp. 291-298, (2014). [64] Lan, T.S., ―Fuzzy Deduction Material Removal Rate Optimization for Computer Numerical Control Turning‖, American Journal of Applied Sciences, ISSN 1546-9239, Volume 7, Issue 7, pp. 1026-1031, (2010). [65] Shivakoti, I., Diyaley, S., Kibria, G. and Pradhan, B.B., ―Analysis of Material Removal Rate using Genetic Algorithm Approach‖, International Journal of Scientific & Engineering Research, ISSN 2229-5518, Volume 3, Issue 5, (2012). [66] Zeqiri, H., Salihu,A., Bunjaku, A., Osmani, H., Qehaja, N., and Zeqiri, F., ―Chip deformation and its morphology in orthogonal cutting of hardened steel 42CrMo4‖, 14th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, (2010). [67] Sima, M. and Ozel, T., ―Modified material constitutive models for serrated chip formation simulations and experimental validation in machining of titanium alloy Ti– 6Al–4V‖, International Journal of Machine Tools & Manufacture, Volume 50, Issue 11, pp. 943-960, (2010). [68] Deshayes, L., Mabrouki, T., Ivester, R. and Rigal, J.F., ―Serrated Chip Morphology And Comparison With Finite Element Simulations‖, Proceedings of IMECE04 2004 ASME International Mechanical Engineering Congress and Exposition, IMECE2004- 60717, (2004). 110 | P a g e [69] Morehead, M.D., Huang, Y. and Luo, J., ―Chip morphology characterization and modeling in machining hardened 52100 steels‖, Machining Science and Technology, ISSN: 1091-0344, Volume 11, pp. 335-354, (2007). [70] Patwari, A.U., Amin, A.K. M. N. and Faris, W., ―Identification of instabilities of chip formation by image processing techniques,‖ Proceedings of ICME, ICME09-RT- 21, Bangladesh, (2009). [71] Chen, G.J., Kong, L.G., Gao, Q. and Liu, X.L., ―Chip Morphology in High Speed Precision Turning Process of Hardened Steel GCr15‖, Key Engineering Materials, Volumes 579 – 580, pp. 12-15, (2014). [72] Mhamdi, M.B., Salem, S.B., Boujelbene, M. and Bayraktar, M., ―Experimental study of the chip morphology in turning hardened AISI D2 steel‖, Journal of Mechanical Science and Technology, Volume 27, Issue 11, pp. 3451-3461, (2013). [73] Shankar, M.C.G., Shivaprakash, Y.M., Jayashree, P.K. and Sharma, S.S., ―Study on Chip-morphology in Turning of Ti-6Al-4V Alloy under High Pressure Neat oil and Soluble oil‖, International Journal of Earth Sciences and Engineering, ISSN 0974- 5904, Volume 6, Issue 4, pp. 832-837, (2013). [74] Salem, S.B., Bayraktar, E., Boujelbene, M. and Katundi, D., ―Effect of cutting parameters on chip formation in orthogonal cutting‖, Journal of Achievements in Materials and Manufacturing Engineering, Volume 50, Issue 1, pp. 7-17, (2012). | en_US |
| dc.identifier.uri | http://hdl.handle.net/123456789/958 | |
| dc.description | Supervised by Prof. Dr. Md. Anayet Ullah Patwari, Department of Mechanical & Chemical Engineering (MCE), Islamic University of Technology (IUT), Board Bazar, Gazipur, Dhaka, Bangladesh. | en_US |
| dc.description.abstract | Turning is one of the most common and popular process in industry for manufacturing metallic products. The two single most important output parameters that define the product quality are surface roughness and tool wear. So it is of primary concern to reduce tool wear and surface roughness of the product in any machining process. Different studies have been carried out to determine the tool wear and surface roughness of the product and their subsequent improvements. Different techniques have been adopted to replace the traditional turning process in an attempt to minimize the tool wear and the surface roughness of the finished product. In this research, a new novel technique has been proposed and adopted with an aim to reduce tool wear and surface roughness of the product. External ultrasonic sound waves were applied during the turning process of mild steel in an attempt to reduce the cutting tool vibration thereby leading to improvements in both surface quality and tool life. Detailed experimentations were carried out to study the effect of external ultrasonic sound wave on tool life of inserts, surface roughness and cutting tool vibration. Experiments were carried out under different ultrasonic frequencies to determine the effective frequency range which optimizes the above parameters to the best degree possible. The goal was to achieve improved machinability and analyze the extent of improvement obtained in the above mentioned machinability factors and the interrelation among them by the application of ultrasonic sound wave. The experimental results showed improvements in all the above machinability factors. In addition to these, the effect of orientation of the application of the ultrasonic sound waves and the amplitude of the waves were studied in detail. Cutting tool vibration and chip morphology were also studied to support the theory suggested. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh | en_US |
| dc.title | Investigation and Optimization of the Effects of Application of Ultrasonic Sound Frequencies during Turning Operation of Steel on Machinability Responses | en_US |
| dc.type | Thesis | en_US |
Files in this item
This item appears in the following Collection(s)
-
2014 [4]